provides automatic welding filter (AWF) inspection certification services

Automatic Welding Filters (AWF) are used to protect the eyes and face from sparks, spatter and harmful radiation under normal welding conditions. Automatic welding filter automatically changes from light state to dark state. When the arc is struck, the arc returns to the bright state when the welding is stopped. Before welding, the only thing you need to do is to adjust the position of the headband and choose the correct shading number for your application.

Applicable Standards

European Union Standards (CE):EN379:2003 A1:2009The product must comply with the requirements of the new EU PPE Regulation (EU)2016/425

American Standards (ANSI):ANSI/ISEA Z87.1-2015

Canadian Standards (CSA):CSA Z94.3-15

Australian Standard (AS/NZS):AS/NZS 1338.1:2010

forthcoming international ISO standard: ISO/WD 16321

, it should be noted that the current ISO standard, when EN379 is changed to ISO16321, if the manufacturer of the automatic welding filter applies for CE test and ISO test at the same time, there is no need (or only a few) to carry out a new test, only need to be evaluated on the basis of the existing test data, update, you can change the EC certificate. Of course, now we only need to carry out EN requirements for evaluation. If the factory applies for ISO at the same time, he will be accused of ISO test data and final evaluation results.

CE Inspection Items Table for Automatic Welding Filter (AWF)

test Plan	Requirements	in accordance with standards Please refer to the original English article number	Sample No.
			1 to 6				7 to 9		10 to 17	18
			LS	DS	IS	LDS	LS	DS
1	Manual control	4.3.5(a). 4.3.5 (c)
2	identification	6
3	surface and material quality	7.1.3of EN 166:2001
4	23℃	Table 1 of EN 169:2002
5	diffuse light	4.3.6, 7.1.2.3 of EN 166:2001
6	23℃	4.3.3
7	23℃	4.3.2.1, 4.3.2.4
8	23℃	5.2 of EN 169:2002, additional requirement(d)
9	23℃	4.3.7
10	shading number setting	4.3.2.5
11	23℃lower shading sensitivity	4.4		Depending on test method
12	diopter	7.1.2.1.2 of EN 166:2001
13	-5℃	4.3.2.2, 4.3.2.3, 4.3.2.5, 4.3.5( B)
14	-5℃	4.3.4
15	10°C	4.3.2.2, 4.3.2.3, 4.3.2.5, 4.3.2.5( B)	a	a	a	A
16	10°C	4.3.4		a
17	55°C	4.3.2.2, 4.3.2.3, 4.3.2.5, 4.3.2.5( B)
18	55°C	4.3.4
19	Manual control	4.3.5(B)
20	23°Canti-ultraviolet	7.1.5.2 of EN 166:2001, 4.1.4.3.6
21	solidity	7.1.4of EN 166:2001
22	flame retardant	7.1.7of EN 166:2001
23	Power Off	4.3.1
24	Special Requirements	4.2	additional samples for special requirements
Number of samples116.may vary depending on the test sequence. pay attention to the meaning of symbols: LSbright state LDSthe most clear state(See Figure1) ISintermediate dark state(See Figure1) DSdarkest state(See Figure1) ais only used if-5°Cnot issued requirements

friendly reminder: for American ANSI/ASTM and Australian AS/NZS certification, we recommend the applicant or manufacturer to directly apply for the test report and COC(Compliance of certificate) issued by SAI or SEI accredited laboratories when the quality control procedures and regulatory conditions of domestic applicants or production plants are not mature. According to our many years of experience and feedback from applicants or manufacturers, the credibility of its test reports and COC certificates will also be recognized by customers.

we offer you:

• Eye/Face Protection Full set of inspection/certification services
• eye/face protection products
• countries
• Automatic Welding Filter (AWF) Inspection Equipment

......

our advantages:

• Huimou (Shanghai)(HUIIMO GROUP SHANGHAI LTD) is the only partner of German ECS GmbH Announcement No.:(1883). The quotation for testing and certification fees comes completely from our German headquarters and there is no additional service fee.
• ECS GmbH can not only provide CE testing and certification for customers, but also provide customers with a series of testing and certification work such as ANSI, CSA, AS/NZS, etc. ECS GmbH is a laboratory authorized by SAI Global in Australia, and its test reports can be recognized by SAI Global.
• We provide the most competitive quotation for testing and certification for Asian customers (especially Chinese customers). Without increasing samples, we can perform CE ANSI CSA AS/NZS testing at the same time, and the total test cost can be greatly reduced.
• We provide customers with a variety of preferential programs and value-added services, more details, please contact us.

Remarks:

ECS GmbH is a certification body approved by the German State Department of Safety and Technical Supervision (ZLS). The scope of its work is mainly related to the detection and certification of any welding and laser radiation protection products. It is a professional EU certification body for eye protection devices in PPE (Announcement No.: 1883). For more information, please seeECS GmbH